Herunterladen Inhalt Inhalt Diese Seite drucken

DHC BT2400 Pro Benutzerhandbuch Seite 10

Cloud-fähiger batterie- und elektrosystemtester
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 44
pop-up may continue. Turn on more loads and repeat the process if this problem
persists.
BATTERY TEST RESULTS
GOOD & PASS
The battery is good and capable of holding a charge.
GOOD & RECHARGE
The battery is good but needs to be recharged.
CAUTION
The battery may be serviced but performance will decline gradually. The
battery may fail under extreme weather conditions and should be closely
monitored, replacement might be necessary. Check battery connection and
charging system to ensure the battery is properly charged.
RECHARGE & RETEST
Battery is discharged, the battery condition cannot be determined until it is
fully charged. Recharge and retest the battery.
BAD & REPLACE
The battery will not hold a charge. It should be replaced immediately.
BAD CELL & REPLACE
The battery has at least one cell short circuit. It should be replaced
immediately.
LOAD ERROR
Failed to measure battery condition, please make sure the battery is not over
3000CCA/SAE, clamps are properly connected to the battery, and
clamps/cables are in a good state. Clamp/cable condition can be determined
with the "Cable Diagnosis" tool. If the problem persists or clamp/cable need
replacing, ask your dealer for replacement parts or further diagnostics.
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis