DHC BT2400 Pro Benutzerhandbuch Seite 11

12V AND 24V SYSTEM TEST
1. Select "SYSTEM TEST" from the main
menu.
2. Enter the VIN of the vehicle. (same
input method as BATTERY TEST)
3. Turn off loads and start engine.
4. Use directional keys to review
cranking test result.
5. Select "NEXT" to proceed to charging
test.
6. "Is it a diesel engine?"
If YES, the tester will ask the
user to rev the engine for 40
seconds before proceeding
to idle & load on test.
If NO, the tester will proceed with
the idle and load on test
directly.
7. Select "NEXT" when idle test is
completed and move on to the ripple &
load on test.
8. Turn on loads and rev engine for 15
seconds.
(The tester will countdown 15
seconds)
9. Once completed, the ripple & load test
results are displayed.
10. Select NEXT to review the complete
system test results including the
cranking, idle, ripple, and load on test
results.
11