Maintenance And Care - Flex L2106VC Bedienungsanleitung

Angle grinder L 2106VC, L 2108 VC

Maintenance and care

Danger!
Before carrying out any work on the angle
grinder, always pull out the mains plug.
Cleaning
Danger!
If metals are ground or cut over a prolonged
period, conductive dust may become
deposited inside the housing.
Impairment of the protective insulation!
Operate the power tool via a residual-
current-operated circuit-breaker (tripping
current 30 mA).
Regularly clean the power tool and
ventilation slots. Frequency of cleaning is
dependent on the material and duration of
use.
Regularly blow out the housing interior and
motor with dry compressed air.
Carbon brushes
The angle grinder features cut-off carbon
brushes.
When the wear limit of the cut-off carbon
brushes is reached, the angle grinder
switches off automatically.
Note!
Use only original parts supplied by the
manufacturer for replacement purposes.
If non-original parts are used, the guarantee
obligations of the manufacturer will be
deemed null and void.
When the angle grinder is being used,
the carbon brushes can be seen sparking
through the rear air inlet apertures.
If the carbon brushes spark excessively,
switch off the angle grinder immediately.
Take the angle grinder to a customer service
workshop authorised by the manufacturer.
Gears
Note!
Do not loosen the screws on the gear head
(4) during the warranty period. Non-
compliance will deem the guarantee
obligations of the manufacturer null and
void.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
Spare-part/Accessory
Quick-release guard
– 180 mm
– 230 mm
Clamping flange A/F 17
Clamping nut
SDS-Clic quick-release clamping
nut
Side handle
Stop key
230 mm cutting guard with
connection for dust extractor
32 mm/4 m long extraction hose
with adapters
Metal carrying case
For other accessories, in particular grinding
tools, see the manufacturer's catalogues.
Order
no.
265.160
265.179
191.604
100.080
253.049
193.356
100.110
252.963
297.011
283.827
19