Divus CIRCLE Bedienungsanleitung Seite 43

These are the fields to fill out:
SETTING DESCRIPTION
Name Insert a unique name for the new user
Insert a numeric code through which the user can open the door/gate (using the
Access Code
1
keypad function
Will show the tag currently assigned to the user. Please note that any tag can be
NFC Tag assigned to only one user. See chapter 4.4 for the procedure of assigning a new NFC
2
tag to a user.
Choose between Access 1 and Access 2 here. For more details, read chapter 6 (I/O
Access Event
modules) and chapter 7.4. Default is Access 1.
Define a start date from when the user will be allowed to access. Leave empty if the
Start date
user should have no time limitations.
Define an end date from when the user will not be allowed to access any more. Leave
End date empty if the user should have no time limitations. Further details (like weekdays etc.)
are defined later on.
1 Only for DIVUS CIRCLE or CIRCLE S+. May need an additional I/O module.
2
DIVUS CIRCLE/SQUARE (any model) with optional NFC module required.
see chapter 4.2.2)
DIVUS CIRCLE user manual .
43