Settings - Photo Events; Appearance (Previously Circle Settings); Logout; Circle Appearance Section (Previously Circle Settings) - Divus CIRCLE Bedienungsanleitung

Version 2 of the firmware introduces the additional Ringing event: even when a call is activated the built-in relay
can be triggered.
3.2.17 SETTINGS – PHOTO EVENTS
Here you can enable and configure a feature which will take photos on certain events, storing them on an ftp
server. This means you need an account on an ftp/ftps server where you have the possibility (access rights and
storage place) to store data. Once you have the configuration settings to access the ftp server, insert them in
this page along with the desired event(s) and save the changes.
3.2.18

APPEARANCE (PREVIOUSLY CIRCLE SETTINGS)

Use this link to switch to the Circle appearance related settings as system integrator. The Appearance settings
have a different graphic design and are used to configure the design and the physical interaction with the DIVUS
Circle. The customer has access to these settings only, with his account. See chapter 3.3 for further details about
all the appearance settings.
3.2.19

LOGOUT

Use this link to close your system integrator session. You will be redirected to the login page.
3.3

CIRCLE APPEARANCE SECTION (PREVIOUSLY CIRCLE SETTINGS)

You reach this section in two ways:
The menu is the following (on a DIVUS CIRCLE as example):
1. When clicking the Appearance link from the System Settings section
2. When logging in with the customer account
DIVUS CIRCLE user manual .
34