Day & Night; Illumination (Divus Circle /Circle Small/Circle Small +) - Divus CIRCLE Bedienungsanleitung

Hint: Repeat the same steps for all the Profiles you want to change.
Hint: All the changes will be stored at the end, clicking the white check mark icon (see above)
3.3.4 DAY & NIGHT
The DIVUS Circle can be configured to use a different appearance and behaviour depending on the time of the
day. To achieve that, you can choose
•
to use the automatic switching between day and night, or to use your own custom time settings defining
•
to assign one of the 3 available profiles to be shown by day and by night
•
to enable or disable the IR lights to illuminate the subject in fro
Finally store your changes clicking the Save button.
3.3.5

ILLUMINATION (DIVUS CIRCLE /CIRCLE small/CIRCLE small +)

The illumination function uses the LED light ring as a means of illumination. The settings are
•
To choose a colour (DIVUS Circle only)
• to enable / disable the function
•
to use the day/night automated switching
• to override the start time and/or end time using custom time values. Please note that the override
settings can only be used to shrink the time frame (not to enlarge it). So e.g. an override start at 20:00
•
to define a manual time frame where the LED ring should be on
the LEDs will turn on at night, off at day.
DIVUS CIRCLE user manual .
40