Installing The Plastic Wedges - Grundig GSN 10730 XN Bedienungsanleitung

3.2 Installing the
plastic wedges
Plastic wedges are used to create
the distance for the air circulation
between the product and the rear
wall. Insert the 2 plastic wedges
onto the rear ventilation cover as
illustrated in the figure. To install
the wedges, remove the screws
on the product and use the screws
given in the same pouch with the
wedges.
The condenser of your appliance is located on the back as shown
below. In order to achieve better energy efficiency with lower
energy consumption, please pull the condenser towards yourself as
illustrated in picture below.
*may not be available in all models
12
MİN
55 mm
initial position
PULL
PULL
better energy
efficiency