Technical Data; Originele Handleiding; Conformiteitsverklaring - Hilti PLT 400 Original Bedienungsanleitung

▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3

Technical data

Maximum emitted transmission power, WiFi for FCC
Maximum emitted transmission power, WiFi for ETSI
WiFi frequency range
Maximum emitted transmission power, Bluetooth
Bluetooth frequency range
4 Switching PLT 400 and PLC tablet on
1. Switch the PLT 400 and the PLC tablet on.
2. Start the PROFIS Layout Field application on the PLC tablet.
3. Comply with the notifications and instructions that appear on the display of the PLC tablet.

Originele handleiding

1 Informatie over de handleiding
1.1 Bij deze handleiding
• Lees voor ingebruikname dit document en de uitgebreide handleiding door. Dit is vereist voor veilig
werken en storingsvrij gebruik.
De uitgebreide handleiding en meer informatie over de bediening, techniek, milieu en recycling vindt u
onder de volgende link: qr.hilti.com/manual/?id=2325080
• De veiligheidsinstructies en waarschuwingsaanwijzingen in deze documentatie, in de uitgebreide hand-
leiding en op het product in acht nemen.
• De handleiding altijd bij het apparaat bewaren en het product alleen met deze handleiding aan andere
personen doorgeven.
1.2

Conformiteitsverklaring

Hierbij verklaart Hilti dat de zender PLT 400 voldoet aan de richtlijn 2014/53. De volledige tekst van de EU-
conformiteitsverklaring is op het volgende internetadres beschikbaar: qr.hilti.com/manual/?id=2325080
*2325080*
®
2325080
24.5 dBm
18.4 dBm
2,400 MHz ... 2,483.5 MHz
| 5,150 MHz ... 5,350 MHz |
5,470 MHz ... 5,835 MHz
9.5 dBm
2,400 MHz ... 2,483.5 MHz
Nederlands 7