Qualified Personnel; Safety Symbols; Safety Precautions - Danfoss VLT Lift Drive LD 302 Installationshandbuch

VLT® Lift Drive LD 302
Installation Guide
1 Installation
1.1 Safety and Installation Awareness
Before starting installation, read and understand this installation guide while paying attention to all safety guidelines and precau-
tions. Additional documentation such as the operating guide as well as functional safety documentation can be accessed by scan-
ning the QR code on the front cover. MyDrive
FUNCTIONAL SAFETY OPTIONS
Functional safety options require additional wiring and parameter configuration. Refer to the specific functional safety operating
guide, such as the Safe Torque Off Operating Guide, for more information on how to install the safety option.

1.2 Qualified Personnel

Only qualified personnel are allowed to install, commission, and maintain Danfoss drives. Qualified personnel are trained individuals
who are familiar with and authorized to mount and wire the drive in accordance with pertinent laws and regulations. Also, qualified
personnel must be familiar with the instructions and safety measures described in this installation guide.

1.3 Safety Symbols

The following symbols are used in this guide:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).

1.4 Safety Precautions

LACK OF SAFETY AWARENESS
This guide gives important information on preventing injury and damage to the equipment or the system. Ignoring this informa-
tion can lead to death, serious injury, or severe damage to the equipment.
-
Make sure to fully understand the dangers and safety measures present in the application.
-
Before performing any electrical work on the drive, lock out and tag out all power sources to the drive.
Danfoss A/S © 2022.09
ecoSmart and pc tools – can be downloaded at www.danfoss.com.
® ™
N O T I C E
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
W A R N I N G
Installation
AN41482598237301-000101 / | 5