Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP 8
Attach the saddle (110) and saddle slide (113) at saddle
support (117).
1. Push the saddle (110) with saddle bracket into the saddle
slide (113) and tight it up in desired position.
2. Place the saddle slide (113) into the holder of saddle
support (117), set it at the desired horizontally position and
screw it onto the saddle support (117) by fixing with washer
(115) and star grip nut (116).
3. Push the saddle support wrapping (114) onto the saddle
support (117). Insert the saddle support (117) into the provided
holder of the main frame (40) and secure at the desired posi-
tion by screwing in the quick release (106). (Note: To screw in
the quick release (106), the threaded hole in the mainframe
(40) and one of the holes in the saddle support (117) must bea-
ligned. Furthermore, ensure that the saddle support (117) is
not pulled out of the main frame beyond the marked maximum
position. The setting of the saddle post can be adjusted as de-
sired later. For this, the quick release (106) must be loosened
by only a few revolutions, the cap of the lock must be pulled
away and the saddle adjusted. Then secure the new setting by
tightening the quick release (106).
CHECKS
1. Check the correct installation and function of all screwed
and plug connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the
machine at a low resistance setting and make your individual
adjustments.
Note:
Please keep the tool set and the instructions in a safe place
as these may be required for repairs or spare parts orders
becoming necessary later.
110
113
115
116
40
106
19
114
117
GB
Werbung
Inhaltsverzeichnis
