Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY INSTRUCTIONS
Remove all the separate parts from the packaging, lay
them on the floor and check roughly that all are there on
the base of the assembly steps. Please note that a num-
ber of parts are connected directly to the main frame pre-
assembled. In addition, there are several other individual
parts that have been attached to separate units. This will
makes assembly easier and quicker for you. Assembly
time: 60 min.
STEP 1
Attach the stabilizer (56+58).
1. Attach the front stabilizer (56) assembled with front caps
with transportation roller (55) to main frame (40) by using bolts
M8x45 (59), washers (37), spring washers (32) and cap nuts
(36).
2. Attach the rear stabilizer (58) assembled with height
adjustable caps (57) to main frame (40) by using bolts (59),
washers (37), spring washers (32) and cap nuts (36). (For
uneven floor, you can adjust the height at rear caps (57) and
secure for stable position.)
STEP 2
Assembly of pedal cranks (97) and crank covers (95).
1. Put the pedal crank (97) at pedal crank holder (93) so that
the holes align and screw it tightly by using screw M8x25 (96)
and spring washers (32).
2. Put the crank cover (95) onto the pedal crank (97) and
attach it by using screws M5x15 (32).
3. Attach the crank plug (94) at crank cover (95).
120
58
57
37
59
119
16
55L
56
59
40
36
32
82
96
93
97
32
97
94
95
GB
Werbung
Inhaltsverzeichnis
