Initial Calibration; Operation; Overview Of Display, Home Screen - OHAUS Ranger 7000 Serie Handbuch

2.5 Initial Calibration

For best results, the instrument's calibration should be checked prior to first use. If adjustment is needed, refer to the
Calibration section of the instruction manual.

3. OPERATION

3.1 Overview of Display, Home Screen

CONTROLS
Button Action
Enter/Exit the library menu
Switch between available application modes
Send the measurement data to available communications ports according to current settings.
Display information about Application Mode, Library, User and Menu
Enter/Exit the User menu
Switch the main weighing unit between the available units
Perform Zero operation
Perform Tare operation
When entering the value first and then pressing this button the number input will be set to preset Tare value.
Short Press: Input '2'-'9'
To Enter 'A' press 2 times. For lower case 'Z', press
Short Press: Input '0'
Long Press: Go to User Login screen
Short Press: Input '1'
Long Press: Switch platform between scale 1 and scale 2
Short Press: Clear character/string when editing string
If no input is active, clear the current
active library
When there is no value added, pressing this button will switch the value sign between positive and
negative.
Short Press: Input '.', space, '_' To Enter '_' press
3 times.
EN-3
5 times.