Improper Use; Technical Data - schellenberg ROLLODRIVE 35 Bedienungsanleitung

Any other or further utilization beyond the explicitly specified shall be regarded as
not intended use�
Alfred Schellenberg GmbH shall not be liable for any consequential damage, pro-
perty damage and personal injury due to improper use�
According to EN 13659, it must be ensured that the displacement requirements as
per EN 12045 are met� When unrolled, the displacement at the lower edge must be
at least 40 mm at an upward-directed force of 150 N� It must be ensured that the
travel speed of the hanging must be less than 0�2 m/s in the last 0�4 m�

IMPROPER USE

The use of the product for applications other than the aforementioned is not permit-
ted�
Using this product outdoors presents a risk of death from short circuit or electric
shock�
Never install or operate the product outdoors�
Mechanical locks of any kind are not suitable for automated operation with this
product�

TECHNICAL DATA

Item number
Power supply operating voltage
Rated output
Standby output
Power supply output
Torque
Max. speed
Max. roller shutter blind surface
22735/22637
230 V AC / 50 Hz
29 W, max. 45 W short term
approx. < 0.7 W
24 V DC / 1.2 A
MdN = 2.5 Nm
34 rpm
4.0 m (3 kg/m roller shutter blind
2 2
surface)
15
GB