Storage; Troubleshooting; Disposal Of The Device - Silvercrest SHTK 2000 A1 Bedienungsanleitung

1) Turn the air intake grill 3 anticlockwise a little way so that it can be removed
from the hair dryer.
2) Clean the openings of the air intake grill 3 with a soft brush.
3) Replace the air intake grille 3 back onto the hair dryer so that the lugs on
the air intake grille 3 engage in the slots on the housing of the hairdryer.
Turn the air intake grill 3 clockwise a little way so that it clicks into place
and sits tightly.

Storage

CAUTION - PROPERTY DAMAGE!
► First pack and transport the hair dryer when it has completely cooled
down. Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section "Cleaning".
■ Retract the cord by pressing the cord retract button
■ Store the hair dryer at a dustfree and dry location.

Troubleshooting

Should your hair dryer not function as expected, first remove the plug from the
mains power socket and allow the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector!
Should the appliance still not function, consult the service department detailed
under "Service".

Disposal of the device

The adjacent symbol of a crossed-out dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive states that this appliance may
not be disposed of in the normal household waste at the end of its useful life,
but must be taken to specially set-up collection locations, recycling depots or
disposal companies.
The disposal is free of charge for the user. Protect the
environment and dispose of this appliance properly.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is
collected separately.
■ 10 │ GB │ IE
2.
SHTK 2000 A1