Cleaning And Storage - Silvercrest SRH 1600 A1 Bedienungs- Und Sicherheitshinweise

Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water .
Switch off the product before
–changing attachments,
–cleaning,
–disconnecting the product from
the power supply .
When the product is used in a
bathroom, unplug it after use since
the proximity of water presents a
hazard even when the product is
switched off .
No action is needed from users to
shift the product between 50 and
60 Hz . The product adapts itself
for both 50 and 60 Hz .

Cleaning and storage

Store the product in a cool, dry
place, protected from moisture and
out of the reach of children .
10 GB
˜ Before first use
Remove the packaging . Check if all parts are
complete .
NOTE: The product may give off some odour
during first use . These are production or transport
residue that will quickly subside .
˜ Operation
˜ Drying hair
(Fig . E)
Unfold the handle
locks in at position c .
NOTE:
Always set the dual voltage selector
the voltage suitable for your current location .
Otherwise, the product will be damaged .
Do not switch on the product if the handle
still in position a or b .
(Fig . B+C)
Dual voltage selector
Turn clockwise
Turn counter-clockwise
Required tool: Screwdriver
Connect the power plug
outlet .
(Fig . D)
Set the O / I / II
5 ] [
positions to turn the product on/off and to set the
air flow and the heat level:
O / I / II
5 ] [
O
I
II
NOTE: In the event of overheating, the product
switches off automatically .
until the foldable joint
4 ] [
to
[ 8 ]
Power
8 ] [
100–127 V ∼
220–240 V ∼
to a suitable electrical
6 ] [
switch to one of its 3
Air flow / Heat
Product off
Product on: gentle air flow
and low heat
Product on: strong air flow
and increased heat
9 ] [
is
4 ] [
∼
∼