Cleaning; Cleaning The Housing; Cleaning The Air Suction Grill - Silvercrest SHTK 2000 A1 Bedienungsanleitung

If you no longer require the finger diffuser 8, wait until the appliance has
■
cooled down and pull it off with a downwards snapping motion:
■ Before you comb your hair out, allow it to cool so that the shaping and styling
can retain its form.
For cooling the hair you can use the cooling level button 7
■
of the heat level switch 6.

Cleaning

RISK OF ELECTRIC SHOCK
► Always remove the mains plug from the socket before you clean the appliance.
► Under no circumstances may you immerse the appliance in water or other
liquids when cleaning it!
► After being cleaned, the hair dryer must be completely dry before using it
again.
WARNING - RISK OF PHYSICAL INJURY!
► Allow the appliance to cool sufficiently before cleaning it.
CAUTION - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.

Cleaning the housing

■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.
■ Please dry everything off properly before using the appliance again.

Cleaning the air suction grill

WARNING - RISK OF FIRE!
Clean the air intake grill 3 at regular intervals with a soft brush.
►
SHTK 2000 A1
or level
GB │ IE │ 9 ■