Display Layout; Alarm Display - Veratron VMH Serie Bedienungsanleitung

DISPLAY LAYOUT

DISPLAY SECTIONS
A: Round Bar Graph
The bar graph helps to interpret the displayed vessel
information quicker and more intuitive. The minimum
and maximum values of the bar graph range are
customizable via the VMH14 App.
(Refer to the section Configurations to learn more about
the process of customizing and the limitations of the bar
graph ranges.)
B: Numeric Value
The big number in the middle represent the measured
value.
C: Unit
The unit of measurement is displayed right next to the
numeric measurement value.
D: Instance
For some data types it's possible that there are several
different values available on the EasyLink bus.
The number in "area D" represents the instance number
of the value, currently displayed. This means, depending
on the data type, the engine number/ tank number/etc. .
E: Data Type Symbol
On the bottom of the display there is a symbol
representing the currently selected data type.
Refer to the section Configuration to see all displayable
values and their according symbols.

ALARM DISPLAY

The display can indicate that the received value has exceeded or fell below a certain threshold. If this is the
case, the bar graph and the numeric value will start to blink with a frequency of 1Hz.
More information about the alarm settings and how to configure them can be found in the section
"Configuration".
DISPLAY LAYOUT
B001225