Veratron VMH Serie Bedienungsanleitung Seite 10

CONNECTION
DEVICE PINOUT
The VMH 14 device is designed with two AMP
SuperSeal 1.5 connectors on the backside – one male
and one female – to allow the daisy-chain connection
of up to 16 instruments in series to the master.
Wire color Description
Red + 12V power
Blue Ground
Yellow EasyLink data
EASYLINK CONNECTION
Once the panel installation is complete it is
possible to connect the VMH 14 to the EasyLink
interface.
The device can be directly connected to the
EasyLink master (like the VMH 35 display), or in
series to another VMH 14 satellite thanks to the
daisy-chain architecture.
EasyLink connection with VMH 35 master
NOTE: One master must always be present in the
system to distribute the data to the satellites.
Make sure the contacts have been locked audibly
into place so to preserve the water tightness.
CONNECTION
and two VMH 14 satellites
B001225