Veratron VMH Serie Bedienungsanleitung Seite 15

4. BARGRAPH SETTINGS
It's possible to customize the range of values,
which the bar graph should be able to reach.
In order to do so, just move the levers into the
desired position.
5. CONFIGURE THE ALARM
The alarm can be activated or deactivated by
using the switches on the right side of the
according alarm description.
Once active, it is possible to set a threshold for it
in the dedicated field.
The threshold unit is the same unit as defined in
step 3.
Note: the alarm threshold direction (active
above or active below) is statically defined (see
table "Alarm Settings").
6. UPLOAD THE CONFIGURATION TO THE
VMH 14
Once the configuration is completed, you can
upload it to the VMH 14.
Press the "WRITE" button on the top/right of
the App screen and near the smartphone again
to the dedicated NFC area of the VMH device.
CONFIGURATION
B001225