Installation
RIA16
3.3
Mounting instructions
The device can be mounted directly on the wall or the optional mounting plate can be used for
wall or pipe mounting (→ å 3).
3.3.1 Direct wall mounting
Proceed as follows to mount the device directly on the wall:
• Drill 4 holes
• Attach the device to the wall with 4 screws (∅5).
3.3.2 Pipe mounting
The mounting bracket is suited for pipes with a diameter between 1" - 5". The mounting kit
consists of a mounting plate (item 1), 2 clamps (item 2) and 4 screws (item 3) (→ å 3 and
→ å 4).
To install the field display unit on a pipe, proceed as follows:
a0011269
Fig. 3: Mounting the field display unit on a pipe with mounting bracket, steps a-b
28
Endress+Hauser