OMUS®C14 Operating Instructions
12.3 Error Acknowledgement
i
In case that a warning occurs, the connected load will continue to operate normally.
•
Warnings cannot be acknowledged.
•
As soon as the cause of a warning disappeared the warning will also disappear without
user interaction.
!
IMPORTANT:
IMPORTANT:
!
•
An error can be acknowledged by pressing the main button for 2s, via a Analog Reset
Signal or via IO-Link.
Reset to Factory Settings
•
It is possible to reset the device setting to factory defaults using the ServiceTool or the
Display.
Page 55 of 71
Errors are leading to a load switch-off.
The root cause of an error must be analyzed and fixed before
acknowledging the error.
94 641 000 B
English.
Revision 09.2022