Point Text Size ® , Einfaches Oder Duales Hohlraumgehäuse - Temposonics Level Plus Refineme Betriebsanleitung

2. MATERIAL TO BE SCREEN PRINTED ALUMINUM WITH SATIN
BACKGROUND AND BLACK TEXT OR LASER ETCHED ALUMINUM.
∆
3. INDICATES CRITICAL DIMENSIONS.
4. DIMENSIONS IN BRACKETS [ ] ARE IN INCHES.
5. MATERIAL: .8 [0.03] THICK ALUMINUM.
6. REFER TO TABLE 1 FOR "L1" & "L2" DIMENSIONS.
B
NOTES:
13.3.1.2 Kennzeichnungen
1. STANDARD LETTERING UNIVERS 55
8 POINT TEXT SIZE
OR ITC GARAMOND BOOK.
2. MATERIAL TO BE SCREEN PRINTED ALUMINUM WITH SATIN
BACKGROUND AND BLACK TEXT OR LASER ETCHED ALUMINUM.
∆
3. INDICATES CRITICAL DIMENSIONS.
4. DIMENSIONS IN BRACKETS [ ] ARE IN INCHES.
5. MATERIAL: .8 [0.03] THICK ALUMINUM.
Temposonics, LLC
6. REFER TO TABLE 1 FOR "L1" & "L2" DIMENSIONS.
3001 Sheldon Dr.
Cary, NC 27513
B
Model No:
Serial No:
Date :
A
WARNING: REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
X
UL
FM
CSA CCoE
PTB KC
Abb. 15: FM-Kennzeichnung Eigensicherheit, Modbus oder DDA, NEMA-Gehäuse
NEPSI SERBIA
8 POINT TEXT SIZE
INMETRO TIIS
DEKRA ABS
IBExU 3-A
A
Temposonics, LLC
Description
3001 Sheldon Dr.
Cary, NC 27513
X
FM UL
METRIC TOLERANCES
CSA CCoE
Model No:
DIMENSIONS ANGLES
PTB KC
0 = ±0.5 0 = ±1°
NEPSI SERBIA
Serial No:
0.0 = ±0.1 0.0 = ±0.5°
INMETRO TIIS
0.00 = ±0.05
0.000 = ±0.025
Date :
DEKRA ABS
MACHINING NOTES
IBExU 3-A
•
First Angle Projection
•
Remove burrs and sharp edges
• Do not scale print
• Machined surface finish min. Ra3.2µm
•
Free of oil and grease
•
Material RoHS conform
WARNING: REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
Abb. 16: FM-Kennzeichnung Eigensicherheit, HART
2
USE TEMPOSONICS LOGO ARTWORK
14.0 POINT SIZE
TEMPOSONICS TO PRINT
SERIAL NO./DATE CODE
Level Plus Transmitter 
USE TEMPOSONICS LOGO ARTWORK
14.0 POINT SIZE
TEMPOSONICS TO PRINT
SERIAL NO./DATE CODE
FM18US0256X
E
FM
D
US
INTRINSICALLY SAFE
APPROVED
CL. I, Div. 1, GR. ABCD
C
CL. I, Zone 0, AEx ia IIC T4 Ga
Ta = -50°C to +71°C ; IP65
REV.
when connected in accordance
with FM approved installation
drawing # 651543-1
P/N 551629-1 REV C
SIL
CML
E
D
C

Level Plus Transmitter
2
REV.
Drawing History
SIL
CML
FM18US0256X
FM
2
US INTRINSICALLY SAFE
APPROVED
CL. I, Div. 1, GR. ABCD
CL. I, Zone 0, AEx ia IIC T4 Ga
Ta = -50°C to +71°C ; IP65
when connected in accordance
with FM approved installation
drawing # 651544-1
651544-1
P/N 551641-1 REV C
, NEMA-Gehäuse
®
MODEL NO.
Temposonics, LLC
3001 Sheldon Drive, Cary, N.C. 27513
INTRINSICALLY SAFE
CL. I, Div. 1, GR. ABCD
CL. I, Zone 0, AEx ia IIC T4 Ga
Ta = -50°C TO +71°C ; IP65
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
Abb. 17: FM-Kennzeichnung Eigensicherheit, Modbus oder DDA, einfaches oder
duales Hohlraumgehäuse
MODEL NO.
Change Logo to Temposonics. Add cert number
9343
Temposonics, LLC
3001 Sheldon Drive, Cary, N.C. 27513
8389 Added 651594-1
8256
Added "D1"
ECO-No.
INTRINSICALLY SAFE
CL. I, Div. 1, GR. ABCD
CL. I, Zone 0, AEx ia IIC T4 Ga
Ta = -50°C TO +71°C ; IP65
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
1
DIMENSIONS
Abb. 18: FM-Kennzeichnung Eigensicherheit, HART
0.000 = ±0.025
•
•
Change Logo to Temposonics. Add cert number
9343
•
8389 Added 651596-1 •
•
E.Jackson 07.09.2021
8256 Added "D1"
•
12/02/2014
NJ
ECO-No.
10/24/2014
NJ
Changed by Change date
DIMENSIONS
0.000 = ±0.025
•
•
•
•
•
•
I 23 I
E.Jackson 07.09.2021
7.5 POINT TEXT SIZE
Level Plus Transmitter

FM18US0256X
4.0 POINT TEXT SIZE
7.5 POINT TEXT SIZE
(TYP.)
Level Plus Transmitter

FM18US0256X
Description
METRIC TOLERANCES
ANGLES
4.0 POINT TEXT SIZE
0 = ±0.5 0 = ±1°
0.0 = ±0.1 0.0 = ±0.5°
(TYP.)
0.00 = ±0.05
MACHINING NOTES
First Angle Projection
Remove burrs and sharp edges
Do not scale print
Machined surface finish min. Ra3.2µm
Free of oil and grease
B.Trovillion 13.09.2021
Material RoHS conform
-
Description
-
Released by
Release date
METRIC TOLERANCES
ANGLES
0 = ±0.5 0 = ±1°
0.0 = ±0.1 0.0 = ±0.5°
0.00 = ±0.05
MACHINING NOTES
First Angle Projection
Remove burrs and sharp edges
Do not scale print
Machined surface finish min. Ra3.2µm
Free of oil and grease
Material RoHS conform
C
B.Trovillion 13.09.2021
[403889, 4038
-2
[403812, 4038
Level Plus RefineME
® ®
Betriebsanleitung
DASH #
-1
[403889, 4038
FM
US
-2
[403812, 4038
APPROVED
INSTALL PER DRAWING # 651543-1 / 651594-1
SUPPLY VOLTAGE: 28 VDC
P/N 551634-X Rev E
FM
US
E.Jackson APPROVED
MS
MS
Changed by
INSTALL PER DRAWING # 651544-1 / 651596-1
SUPPLY VOLTAGE: 28 VDC
Drawing History
P/N 551642-X Rev E
, einfaches oder duales Hohlraumgehäuse
®
E.Jackson
MS
MS
-
Changed by
-
Drawing History
B
LIMAT
1
HOUS
ADAL
LIMATH
SEE
SEE
1
1