Introduction - Parkside PAHE 20-Li B2 Originalbetriebsanleitung

GB IE
Content
Introduction ...............................28
Proper use .................................29
General Description ....................29
Scope of delivery ........................... 29
Overview ...................................... 29
Safety features ............................... 30
Description of functions ................... 30
Technical Data ............................30
Notes on Safety .........................31
Symbols in the manual .................... 31
Symbols on the Equipment .............. 31
General Notes on Safety ................. 32
RESIDUAL RISKS ............................ 32
General safety instructions for
power tools ................................... 32
Safety information for chainsaws ..... 34
Kickback causes and how to avoid
them with pole-mounted pruners ....... 35
Additional safety instructions ........... 36
Assembly ...................................37
Remove/insert battery .................... 37
Mounting the saw chain ................. 37
Tensioning the saw chain ................ 38
Assembling the motor head ............. 38
Initial Operation .........................38
Chain lubrication ........................... 39
Pivoting the pole-mounted pruner ..... 40
Putting on the carrying strap ............ 40
Moving the eyelet for the carrying
strap ............................................. 40
Adjusting/mounting the additional
handle .......................................... 40
Extending the tubular shaft ............. 41
Switching on and off ...................... 41
Safe working .............................41
Putting down the device .................. 42
Cutting techniques using the pole-
mounted pruner ............................. 42
Maintenance/Cleaning ...............43
Cleaning ....................................... 43
Service intervals............................. 43
Service intervals table ..................... 44
28
Sharpening the cutting teeth ............ 44
Changing the saw chain .................44
Servicing the blade bar ..................44
Turning the blade bar .....................44
Storage ......................................45
Transport ...................................45
Waste Disposal and
Environmental Protection ...........45
Spare Parts/Accessories .............46
Trouble Shooting ........................47
Guarantee .................................48
Repair Service ............................49
Service-Center ............................49
Importer ....................................49
Translation of the original
EC declaration of conformity .... 221
Exploded Drawing ................... 229

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has been
checked for quality and subjected to a final
inspection. The functionality of your equip-
ment is therefore guaranteed. It cannot be
ruled out that residual quantities of lubri-
cants will remain on or in the equipment in
isolated cases. This is not a fault or defect
and it represents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use and
disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.