Safety Information For Chainsaws - Parkside PAHE 20-Li B2 Originalbetriebsanleitung

GB IE
switch does not turn it on and
off. Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Remove the plug from the
wall socket and/or remove the
rechargeable battery before
you change the settings of the
device, change accessory parts
or put away the device. Such pre-
ventive safety measures reduce the risk
of starting the power tool accidentaIly.
d) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with
the power tool or these instruc-
tions to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool's
operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, tak-
ing into account the working
conditions and the work to be
performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
34
5) Use and treatment of the bat-
tery-powered tool
a) Only recharge batteries using chargers
recommended by the manufacturer. If
a charger that has been designed for
a particular type of battery is used to
charge other batteries, there is a risk of
fire.
b) Only use the battery that is intended in
an electric tool. The use of other batte-
ries may create a fire hazard and lead
to injury.
c) When not in use, keep batteries away
from paper clips, coins, keys, nails,
screws or other small metal objects that
could cause the contacts to be bridged.
A short circuit between battery contacts
can result in burns or a fire.
d) When misused, fluid may leak from the
battery. Avoid any contact with it. On
accidental contact, wash in running
water. If the fluid comes into contact
with the eyes, seek medical assistance
also. Leaking battery fluid can cause
skin irritation or burns.
6) Service
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Safety information for
chainsaws
• When in operation, keep all
body parts away from the saw
chain. Before you start the saw,
ensure that the saw chain is not
touching anything. When using a
chainsaw, losing concentration for just