SUPAIR DELIGHT 4 SPORT Benutzerhandbuch Seite 58

Harness user's manual | DELIGHT 4 SPORT
OPERATING INSTRUCTIONS
General: Always pay close attention to correct alignment, especially the
way the COBRA® component are pointing. The upper side must face away
from the persons body.
COBRA® buckles:
Open: Press both clips simultaneously.
Close: insert the male part into the female part without exercising the clips.
A click sound should be audible from both clips. By pulling on it shortly, test
whether the buckle is really closed.
Adjuster bar / Middle bridge: it is possible to adapt the length of the
harness with the adjustment mechanism. Take care to backthread the
strap correctly (see illus. 7).
If the ends have not been suitably sewn closed
by the manufacturer, the harness can come unthreaded. Make sure that
the harness does not unintentionally slip out.
CLIMATE FOR USE
The use temperature of the COBRA® component (dry) is from about -80°C
to +80 °C.
LIFESPAN
Lifespan of the COBRA® component is largely dependent on the ways
it is used and the frequency with which it is used, together with other
external influences. Maximum lifespan in optimum storage conditions and
without use is 15 years. Maximum life of use as of its first deployment is
10 years. The actual lifespan of the COBRA® component ends when one
of the following criteria for end-of-use becomes applicable (see point End
of Use) and depends on various factors: intensity of usage, frequency of
usage, environment of usage and user competence, storage conditions,
care and maintenance, etc.
Unusual circumstances can reduce the component life of an element
to a one-time usage, e.g. contact with chemicals, extreme temperatures,
salty or acidic atmosphere, sharp edges, extreme loads.
Revision index: V1 25/08/2022
END OF USE
In the following cases, the equipment should immediately be removed
from
active use:
• The equipment fails to pass the check-test (both before each usage,
during use and in regularly conducted test examinations).
• The equipment has been subject to heavy, high burdens (unless
perfect and assured use can be verified by a professional person).
• The history of its use is unknown or incomplete.
• In case damages, deformation, cracks or stark abrasion of the metal
parts are observed.
• You have doubts about the reliability of the equipment.
• The component is too old (or legal requirements have changed, norms
and technical standards have been altered, new rules are introduced,
incompatibility with other products is determined, etc.)
For COBRA® buckles only:
• The clips for opening the buckle do not operate or do not operate
easily despite thorough cleaning and lubricating; or after having been
used do not return to the original position.
• The buckle does not close correctly – the characteristic click-noise
must be audible for both clips when closed.
Dispose and destroy the discarded parts immediately in order to prevent
any further use by others.
ALTERATIONS AND REPAIRS:
If original parts of the COBRA® component are altered or removed,
the safety features can be comprised. The equipment must not be
altered or fitted with additional parts in any way which is not expressly
recommended by the manufacturer.
ANNEX
SUPAIR | DELIGHT 4 SPORT| page 58