Herunterladen Diese Seite drucken

Werbung

Doc. N.° 1SDH000999R0720 - ECN000209346 - Rev. F
SACE Emax 2 - Tmax XT
Interblocco meccanico MI tipo A - E1.2 - XT7M - XT7
Mechanical interlock MI type A - E1.2 - XT7M - XT7
Mechanische Verriegelung
MI typ A - E1.2 - XT7M - XT7
Verrouillage mécanique MI type A - E1.2 - XT7M - XT7
Enclavamiento mecánico MI tipo A - E1.2 - XT7M - XT7
机械式联锁
类型
MI
A - E1.2 - XT7M - XT7
ATTENZIONE! Dove è indicato il simbolo
WARNING! Lubricate where indicated by the
ACHTUNG! Wo das Symbol
ATTENTION! Là où est indiqué le symbole
¡ATENCIÓN! Donde está indicado el símbolo
1
2
2
1
tipo mobilgrease 28, disponibile anche nel greasing kit ABB (1SDA076082R1).
type, also available in the ABB greasing kit
Mobilgrease 28 ausgeführt werden, das auch im ABB Greasing Kit verfügbar ist
(1SDA076082R1).
graisse type mobilgrease 28, disponible aussi dans le Kit greasing d'ABB
(1SDA076082R1).
tipo mobilgrease 28, disponible también en el greasing kit ABB (1SDA076082R1).
OK
OK
la lubrificazione deve essere effettuata con grasso
symbol using grease of the mobilgrease 28
(1SDA076082R1)
angegeben ist, muss die Schmierung mit Fett der Sorte
la lubrification doit être effectuée avec de la
la lubricación se deberá efectuar con grasa
E1.2 - XT7M - XT7
1
2
.
ABB

Werbung

loading

Inhaltszusammenfassung für ABB SACE Emax 2

  • Seite 1 (1SDA076082R1) ACHTUNG! Wo das Symbol angegeben ist, muss die Schmierung mit Fett der Sorte Mobilgrease 28 ausgeführt werden, das auch im ABB Greasing Kit verfügbar ist (1SDA076082R1). ATTENTION! Là où est indiqué le symbole la lubrification doit être effectuée avec de la graisse type mobilgrease 28, disponible aussi dans le Kit greasing d’ABB...
  • Seite 2 Group 1 M4x10 Ø SACE Emax 2 | ABB...
  • Seite 3 Extraíble montaje en la pared montaje en el suelo montaje en la pared montaje en el suelo 抽出式 壁式安装 底面安装 壁式安装 底面安装 M4x12 M4x10 M4x30 M5x25 Ø Ø M5x8 M4x16 Ø SACE Emax 2 | ABB...
  • Seite 4 Taladrado de la superficie de apoyo para el cable Taladrado de la superficie de apoyo para el cable 电缆安装表面钻孔 电缆安装表面钻孔 (3.15") (2.76") (1.97") (5.98") max 2750 (max 108.27") 2 Nm 17.7 lb in 3 Nm 26.6 lb in SACE Emax 2 | ABB...
  • Seite 5 E1.2 - XT7M XT7 F SACE Emax 2 | ABB...
  • Seite 6 SACE Emax 2 | ABB...
  • Seite 7 FLOOR MOUNTED E1.2 - XT7M - XT7 F 2 Nm 2 Nm 17.7 lb in 17.7 lb in FLOOR MOUNTED E1.2 - XT7M - XT7 F 2 Nm 17.7 lb in 2 Nm 17.7 lb in 2 Nm 17.7 lb in SACE Emax 2 | ABB...
  • Seite 8 墙壁式安装示例 2 Nm 17.7 lb in Esempio per montaggio a parete Example for wall mounting Beispiel für Wandanbau Exemple pour montage sur paroi Ejemplo para montaje en la pared 墙壁式安装示例 3.7 Nm 32.7 lb in SACE Emax 2 | ABB...
  • Seite 9 Kabelbindern an der Schaltanlage anschließen. - Positionner les câbles dessous le Disjoncteur/parties fixes en le branchant au tableau à l'aide de colliers. - Posicionar los cables por debajo interruptor/partes fijas conectándolos al cuadro mediante las bridas. - 将电缆布设在CB/固定部件下方,并使用扎线带将其固定在开关柜上。 SACE Emax 2 | ABB...
  • Seite 10 - Tirar del cable en la funda como indica la flecha 1 hasta que la punta de la parte opuesta toque con la funda como indica la flecha 2; marcar el cable para el corte, en correspondencia con el plano indicado por la flecha 3; cortar como muestra la flecha 4. 如箭头 所示,将电缆拉入屏蔽层,直到另一侧端部倚靠到屏蔽层,如箭头2所示。在电缆上标记用于在水平面上切割 使用箭头3所示的平面,随后根据箭头4所示进行切割。 SACE Emax 2 | ABB...
  • Seite 11 警告:紧固束带,确保完成调节后电缆形态不会出现变化。 E1.2 - XT7M XT7 F 0.8 Nm 0.8 Nm 7.1 lb in 7.1 lb in 1.5 Nm 13.3 lb in 1.5 Nm 1.5 Nm 13.3 lb in 13.3 lb in SACE Emax 2 | ABB...
  • Seite 12 3.1 向上拉动已闭合断路器的电缆‘‘Y2’’,直到已断开的断路器横拉杆‘‘Y4’’略微触碰到表面 ‘‘Y3’’ 3.2 将沉头螺钉M4 ‘‘Y1’’ (1 5 Nm / 13. lb in)锁止并闭合相应的锁紧螺母 (1 5 Nm / 13. lb in) 4 断开断路器 ‘‘CB1’’ 5 闭合断路器 ‘‘Cb2’’并重复操作步骤 3.1 和 3.2 6 断开断路器 ‘‘CB2’’ 7 执行若干断开和闭合操作,随后检查横拉杆‘‘Y4’’是否触碰到表面 ‘‘Y3’’ 8 断开已闭合的断路器 SACE Emax 2 | ABB...
  • Seite 13 Cables Three years or 50% of mechanical life or 50% of electrical Cables replacement is suggested life of the higher frame breaker involved in the interblock. After a trip due to short-circuit SACE Emax 2 | ABB...
  • Seite 14 © Copyright 2014-2021 ABB. All rights reserved. www.abb.com...

Diese Anleitung auch für:

Sace tmax xtSace tmax xt7Sace tmax xt7m