Adjustment Of The Door Spring Tension - Pkm GSP9-5FI Bedienungsanleitung

B
3. Align the decoration panel with the outside of the appliance door properly and
fix it using the four long screws (C / s. fig. below).
C
D
E

2.11 Adjustment of the door spring tension

❖ After having installed the decoration-panel, try to open and close the door to
check its balance and to decide if it can remain in its installation-condition. When
the door is balanced improperly, turn the screws in clockwise and anti-clockwise
direction for proper adjustment (or let the balance adjust by an experienced
person).
1. Turn the setscrew to tighten or loosen the steel cable using a Phillips screwdriver
(s. fig. below).
An incorrectly adjusted door spring tension can damage the appliance.
O
PENINGS TO INSTALL THE DECORATION PANEL
S
CREW HOLES
I
NSIDE OF THE APPLIANCE DOOR
H
OW TO ADJUST THE DOOR SPRING TENSION
/
LONG SCREWS
D
ECORATION PANEL
~ ~
104
(4 pcs.)