Technical Data - PowerG N0E-10ET-10.8 Originalbetriebsanleitung

5. Do not wear loose clothing, jewelry, or short
pants while operating.
and balance during operation; always use the
provided harness to distribute the load evenly on
your body.
7. Wear sturdy boots to protect yourself from
slipping.
8. Keep your eyes not only on the branches you
are cutting, also keep an eye on the ground to
prevent tripping over from branches that already
have fallen.
9. Keep a period of rest for at least 30 minutes
after one hour's operation; otherwise you are get
too tired to control the pruner.
10. Do not use the machine if the switch does not
controlled with the switch is dangerous and must
be repaired.
11. Do not stand under the branch you are
cutting. Branches may fall without warning. Also
beware of the risk of being struck by those that
rebound after hitting the ground. Work at an
angle of no more than 60°. (A33)
12. When using the pole-mounted pruner, never
stand on a ladder or any other kind of unstable
pedestal. (A34)
13. Hold the saw with both hands during
pole-mounted pruner during the cutting process.
Never apply force in order to cut through the
branches.
14. Never use the pole-mounted pruner to cut
branches with a diameter which is larger than the
length of the cutting blade.
15. Do not use the pole-mounted pruner in the
vicinity of cables and power or telephone lines.
Keep a minimum distance of 10 meters to all
power lines. (A35)
16. Always use the carrying strap and hold the
saw with both hands with the handles provided.
handles and the pole. (A36)

Technical data

Technical data
Battery type:
Battery capacity:
No load speed:
Cutting length (hedge trimmer):
Cutting width (grass shear):
Cutting diameter (reciprocating saw):
Rated input of charger:
Rated output of charger:
Charge time:
Weight of machine:
Sound pressure level:
Grass shear 76.3 dB(A), uncertainty K=3 dB
Hedge trimmer 72.7 dB(A), uncertainty K=3 dB
Reciprocating saw 74.3 dB(A), uncertainty K=3 dB
Sound power level:
Grass shear 86.8 dB(A), uncertainty K=3 dB
Hedge trimmer 81.6 dB(A), uncertainty K=3 dB
Reciprocating saw 86.38 dB(A), uncertainty K=3 dB
Guaranteed sound power level:
Vibration:
.
Information:
- The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one tool
with another
- The declared vibration total value may also be
used in a preliminary assessment of exposure.
Warning:
- The vibration emission during actual use of the
value depending on the ways in which the tool is
used.
- The need to identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
it is running idle in addition to the trigger time).
37
Lithium-Ion 10.8 V d.c.
1 Ah
1100 min
200 mm
160 mm
70 mm
100-240 V~, 50-60 Hz, 15 W
12.6 V d.c./ 500 mA
3-5 h
2.1 kg
87 dB(A)
.
-1