Signs And Symbols; Residual Risks - PowerG N0E-10ET-10.8 Originalbetriebsanleitung

branch under tension may hit the operator;
additionally, the operator may lose control over
the machine.
7. Pay particular attention when cutting copse
and young trees. This thin material is likely to be
trapped in the blade and strike you or make you
lose your balance.
front handle for carrying. Keep the blade away
from your body. Always apply the protective
cover for transport and storage. Handle the
machine with care to reduce the risk of coming in
contact with the running blade.
9. Follow the instructions for lubrication,
maintenance and the replacement of
accessories. Improperly maintained or lubricated
blades may either break or increase the risk of
kickbacks.
10. Keep the handles dry, clean and free from
oil and grease. Greasy and oily handles are
slippery and may result in the loss of control.
11. Only use the machine for work which
complies with its intended purpose. Example:
do not use the machine for cutting plastic,
masonry or building materials. Using the
machine for unintended purposes may lead to
dangerous situations.

Residual risks

Residual risks
Even if you use this power tool in accordance
to instructions, certain residual risks cannot be
eliminated. The following hazards may arise in
connection with the equipment's construction
and layout:
- Cut injuries if no safety clothing is used.
- Lung damage if no suitable protective dust
mask is applied.
- Damage to hearing if no suitable ear protection
is applied.
- Health damage caused by hand-arm vibrations
if the equipment is used over a longer period or
is not properly guided and maintained.
Warning! The power tool generates an
or passively impede medical implants. To
reduce the risk of serious or fatal injuries, we
recommend persons with medical implants
to consult their doctor and the manufacturer
of the medical implant prior to using the
equipment.

Signs and symbols

Signs and symbols
The following signs and symbols are used for this
power tool. The correct interpretation of these
signs and symbols allows for a safer and more
Warning!
Read the operating instructions
before commissioning the
power tool and before starting
maintenance, assembly and
cleaning.
Wear a safety helmet, goggles
and hearing protection before
starting the power tool.
Keep persons at a safe distance
to the machine.
Do not use the power tool in the
rain, and do not expose it to rain.
31