Intended Use; General Safety Instructions - PowerG N0E-10ET-10.8 Originalbetriebsanleitung

Important: Important:
GB
When using the machine, a few safety
precautions must be observed to avoid injuries
and damage. Please read the complete operating
instructions and safety regulations with due care.
Make sure that you are familiar with the controls
and properly operate the machine. Keep this
manual in a safe place, so that the information
is available at all times. If you give the machine
to any other person, hand over these operating
instructions and safety regulations as well.
We cannot accept any liability for damage or
accidents which arise due to a failure to follow
these instructions and the safety instructions.

Intended use

Intended use
This machine is suitable for cutting hedges,
bushes and shrubs in private gardens/hobby
area.
The machine ÿtted with a cutting attachment
mounted on a pole enables the operator to cut
the small branches of standing trees.
With di˜ erent saw blades mounted, the machine
can be used for cutting thin wood board,
aluminium sheet and small diameter tree trunks.
Any use which is not expressly permitted in
manual may result in damage to the machine
and place the user in serious danger.
Please note that our equipment is not designed
for commercial, trade or industrial use. Our
warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or
for equivalent purposes.

General safety instructions

General safety instructions
Read the instruction manual completely
and carefully before using the power
tool.
WARNING! Failure to follow the warnings and
instructions may result in electric shock, ÿre and/
or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
and dark areas invite injuries.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
b) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while your tired
or under the in uence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
c) Avoid accidental starting. Ensure the
switch is in the o position before plugging
in. carrying power tools with your ÿnger on the
switch or plugging in power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
26