Selection And Qualification Of Person; Safety Instructions Governing Specific Operational Phases - GÖLZ KB 200 Bedienungsanleitung

KB 200
Bedienungsanleitung / Operating instructions / Mode d'emploi
Personal protective equipment must be used wherever required by the circumstances or by law (e.g.
safety glasses, ear protectors, safety boots, suitable safety clothing). Observe the regulations for the
prevention of accidents!
The personal protection equipment, for work with the drill rig KB200, should consist of the following
parts:
Helmet with protection of the ears
(1)
Visor or safety glasses
(2)
Dust mask
(3)
Protective gloves
(4)
Safety clothes
(5)
Safety boots
(6)
1.3

Selection and qualification of person

Any work on and with the machine must be executed by reliable person only. Statutory minimum age
limits must be observed!
Employ only trained or instructed staff and set out clearly the individual responsibilities of the
personnel for operation, set-up, maintenance and repair. Gölz GmbH can help for instruction.
Make sure that only authorized personnel works on or with the machine.
Define the machine operator's responsibilities - also with regard to observing traffic regulations - giving
the operator the authority to refuse instructions by third parties that are contrary to safety.
Do not allow persons to be trained or instructed or persons taking part in a general training course to
work on or with the machine without being permanently supervised by an experienced person.
1.5

Safety instructions governing specific operational phases

Before work
Avoid any operational mode that might be prejudicial to safety. Before beginning work, familiarize
yourself with the surroundings and circumstances of the site, such as obstacles in the working and
travelling area, the soil bearing capacity and any barriers separating the construction site from public
roads. Regard all safety specifications!
Take the necessary precautions to ensure that the machine is used only when in a safe and reliable
state. Operate the machine only if all protective and safety-oriented devices, such as removable safety
devices, emergency shut-off equipment, sound-proofing elements and exhausters, are in place and
fully functional.
Check the machine at least once per working shift for obvious damage and defects. Report any
changes (incl. changes in the machine's working behaviour) to the competent organization/ person
immediately. If necessary, stop the machine immediately and lock it. Have any defects rectified
immediately.
At any time, ensure the operator has sufficient view to his working area, in order to have intervention
to the working process. Wet drilling is to be accomplished while working. This prevents the appear-
ance of particulate matter and increases the life-time of the diamond tool.
All manuals and user guides at all-guides.com
- 17-
02952000996
5005984-01