Charging The Battery, Leds; Charging The Battery; State Of Charge; Leds On Battery - Stihl BGA 56 Gebrauchsanleitung

6 Charging the Battery, LEDs

– Charger, @ 4.6.3.
► If you cannot carry out this work: Contact your STIHL
servicing dealer.
6 Charging the Battery, LEDs
6.1

Charging the Battery

The charging time depends on several factors, e.g.
temperature of the battery, ambient temperature. The actual
charging time may differ from the specified charging time.
For specified charging times see www.stihl.com/charging-
times.
The charging process starts automatically
when the battery is inserted in the charger.
The charger switches itself off automatically
when the battery is fully charged.
The battery and charger heat up during the charging
process.
2
4
1
► Insert the plug (6) in a convenient wall outlet (7).
The charger (3) runs a self test. The LED (4) glows green
for about 1 second and then red for about 1 second.
0458-712-9621-B
All manuals and user guides at all-guides.com
3
7
6
5
WARNING
Persons may trip over the connecting cable. This can result
in injuries and may damage the charger.
► Lay the connecting cable flat on the floor.
► Position the connecting cable (5).
► Insert the battery (2) in the guides in the charger (3) and
press it home as far as stop.
The LED (4) glows green.
The LEDs (1) glow green and show the state of charge.
► If the LED (4) and the LEDs (1) stop glowing: Disconnect
the plug (6) from the wall outlet (7).
Battery is fully charged.
► Remove the battery (2).
6.2

State of Charge

1
► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
► If the LED on the right flashes green: Charge the battery.
6.3

LEDs on Battery

The LEDs can indicate the battery's state of charge or
malfunctions in the blower or battery. The LEDs can glow or
flash green or red.
English
80-100%
60-80%
40-60%
20-40%
0-20%
35