Led On Charger; Assembling The Blower; Mounting, Adjusting And Removing The Nozzle; Removing And Fitting The Battery - Stihl BGA 56 Gebrauchsanleitung

English
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Rectify the malfunction.
Malfunction in blower or battery.
6.4

LED on Charger

The LED indicates the operating status of the charger.
If the LED glows green, the battery is being charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.

7 Assembling the Blower

7.1

Mounting, Adjusting and Removing the Nozzle

The nozzle can be mounted to the blower tube in three
positions to suit the height and reach of the user. The
positions are marked on the blower tube.
► Switch off the blower and remove the battery.
1
2
► Line up the lug (3) and the slot (2).
► Push nozzle (1) into required position on blower tube (4).
► Rotate nozzle (1) until it engages.
36
All manuals and user guides at all-guides.com
3
4

8 Removing and Fitting the Battery

8.1

Fitting the Battery

1
2
► Insert the battery (1) in the battery compartment and press
it home until it engages with an audible click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). No electrical
contact between blower and battery (1).
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages with a second click and is flush
with the blower's housing. Blower is ready for operation.
8.2

Removing the Battery

► Stand the blower on a level surface.
► Hold one hand in front of the battery compartment to
ensure the battery does not fall out.
7 Assembling the Blower
3
0458-712-9621-B