Pin Query Mode; Changing Pin; Selecting Tv/Radio Channels - TechniSat DIGIT HD4 CX CSP Bedienungsanleitung

8.2 PIN query mode

> In this line, use the arrow keys left/right to set the pin query mode of the parental
control function to On or Of.
> If you set the pin query mode to On, and have not yet changed the factory PIN, you
will be requested to change the PIN.
8.3 Changing the PIN
The unit PIN code is set to 0000 at the factory.
> Press the OK key.
> The menu for changing the unit PIN code will be displayed.
> Now use the numeric keys to enter the current unit PIN code in the line Unit PIN
(factory setting 0000).
> In the line Enter new PIN use the numeric keys to enter the desired new unit PIN code.
> Repeat the entry in the line Repeat new PIN.
> When you have completed changing the PIN code in this manner, you will be taken
back automatically to the menu Parental control.

8.4 Selecting TV/Radio channels

> Use the arrows keys up/down to highlight select TV or select Radio option.
> Confirm by pressing OK,
> Press the red function key to open a selection window. Here you have the option of
selecting the desired program list type.
> Block the channel by pressing the yellow function key.
> When you have finished configuring the program list according to your preferences in
this manner, press the Menu key to return to normal operation.
> To reverse the blocking of individual channels, proceed as described above to mark
the appropriate channel, and remove the parental control symbol by pressing the
yellow function key.
Further information available on the web at www.technisat.com
18