Adjusting Image Changeover Speed; Exiting Slide Show; Film Playback In Mpg Format; Pause/Still Picture - TechniSat DIGIT HD4 CX CSP Bedienungsanleitung

7.2.2 Adjusting image changeover speed

> By pressing the right/left Arrow keys, you can adjust the image changeover speed to
between 5 and 100 seconds.
Please note, for large files and short interval times, it may be impossible to display all of the
images in the time allowed. If the specified image changeover time is too short for the images,
the picture is displayed after it has finished being read.

7.2.3 Exiting Slide show

To end the slideshow, press the Stop key.
> To activate the navigator or to revert back to normal operation, press the TV/Radio key.

7.3 Film playback in MPG format

With your receiver, you can display data, which is saved in MPG format on a device connected
via the USB socket. The USB device should be formatted using the file system FAT 32.
> By pressing the blue key Functions, the NAV menu opens.
> Use the arrow keys up/down to highlight the line Films and confirm by pressing OK.
> Use the arrow keys up/down to select the source from which you wish to view the
Film files, and confirm by pressing OK. A list showing the film files available on the
USB device or the inserted cards will be displayed.
> Use the arrow keys up/down as applicable to initially highlight the folder, which
contains the desired film file and confirm by pressing OK.
> Use the arrow keys up/down to select from the list of MPG files, which you wish to
view and confirm with OK.

7.3.1 Pause/Still picture

> To pause the playback of a recording (still picture), during playback, press the Pause /
Play key or the Still picture button. The symbol „Pause >II" will be displayed.
> Press the relevant key again to restart the playback from the same position.

7.3.2 Fast Forward

To access a specific portion of a film, your device includes variable speed Fast Forward and
Rewind functions.
> During playback, press the Fast Forward or Rewind key. The display indicates "Fast
Forward >>" or "Rewind <<". The recording will now be run at 4 normal speeds in the
desired direction.
> Press the Fast Forward or Rewind key again and the speed increases to 16. The display
indicates "Fast Forward >>" or "Rewind <<".
> Press the Fast Forward or Rewind key again and the speed increases to 64. The display
indicates "Fast Forward >>" or "Rewind <<".
> Once the desired portion of the recording has been reached, you can access normal
playback by pressing the Pause / Play key.

7.3.3 Zoom

Press the Zoom key first. A zoom selection screen then appears.
> By pressing the Zoom or Arrow keys right/left repeatedly, the various zoom factors
can be adjusted.
> Exit zoom selection by pressing the Back button.
15