Timer Controlled-Recording; Timeshifted Recording; Parental Control; Parental Control Settings - TechniSat DIGIT HD4 CX CSP Bedienungsanleitung

Ending a recording manually
To end the recording procedure, first press OK.
> Now press the green function key to go to the PVR navigator.
> Use the arrow keys up/down to mark the current recording and confirm by pressing OK.
The program slot of the current recording will now be selected.
> Now press the green function key Stop. A query will appear.
> Use the arrow keys up/down to select Save in order to save the recording on the
external USB drive, or select Discard, in order not to save the program, and confirm
by pressing OK.

7.4.4 Timer controlled-recording

Receiver can record programs on the external USB drive in your absence, using the hard drive
timers. In addition, your receiver is equipped with video recorder timers and channel switching
timers. In terms of their programming, these Timer types differ only in name. During standby
mode, hard drive and video recorder timers are indicated by a clock symbol.
External USB timer
In the case of this function, your digital receiver will be switched on and of for the recording, so this
can be recorded in your absence. If the unit was switched on by the hard drive timer, this will be
indicated by "_ PVR Timer" in the display. Some of the remote control functions will be deactivated.
Manual programming of timer
Use the Menu key to call up the Main menu.
> Use the arrow keys up/down to mark the line Manage timer.
> Confirm by pressing OK.
> The sub-menu Manage Timer will be displayed.
> Go to the settings of the timer as describe under point 6.3
7.4.5 Time shifted recording
The time-shift function provides the facility of recording and playing back at the same time.
This is made possible by Time-Shift technology. Thus you can already view the beginning of the
recording, and can decide to skip over certain passages already recorded (e.g. advert breaks).
The live signal of the broadcast will continue being recorded at the same time.
Attention: If you want to get an access to recordings saved on external USB device in normal
operation, please press the green key function to cause PVR Navigator. If you are in Radio or TV
mode, on the screen will be shown Radio or TV recordings.

8. Parental control

Your receiver is equipped with a parental control function. This means that important functions
(e.g. calling up the main menu) can be protected from unauthorized use. In addition, recordings
and channels that you have blocked can only be accessed by entering a four-digit PIN code.

8.1 Parental control settings

> Use the Menu key to call up the Main menu.
> Use the arrow keys up/down to mark the line Settings.
> Confirm by pressing OK.
> Use the arrow keys up/down to mark the line Parental control.
> Confirm by pressing OK.
17