Kärcher K 3.65 M Betriebsanleitung Seite 13


The appliance may only be connected to
an electrical supply which has been in-
stalled in accordance with IEC 60364.

The appliance may only be connected to
alternating current. The voltage must cor-
respond with the type plate on the appli-
ance.

For safety reasons, we recommend that
you operate the appliance only via a
earth-leakage circuit breaker (max.
30 mA).

Cleaning operations which produce oily
waste water, e.g. engine washes, under-
body washes, may only be carried out us-
ing washing stations equipped with an oil
separator.

This appliance was designed to be used
with detergents which are supplied or rec-
ommended by the manufacturer. The use
of other detergents or chemicals may
compromise the safety of the appliance.
Safety Devices
Caution
Safety devices protect the user and must not
be modified or bypassed.
Power switch
The appliance switch prevents unintentional
operation of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appli-
ance.
Overflow valve with pressure switch
The overflow valve prevents the permissible
working pressure from being exceeded.
If the lever on the trigger gun is released the
pressure switch turns off the pump, the high-
pressure jet is stopped. If the lever is pulled
the pump is turned on again.
Prerequisites for the appliance's
stability
Caution
Create stability for the appliance prior to all
work on or with the appliance to prevent acci-
dents or damage.
The stability of the appliance is warranted
–
when it is placed onto an even surface.
Scope of delivery
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness when
unpacking.
In the event of missing accessories or any
transport damage, please contact your deal-
er.
Description of the Appliance
Illustrations on Page 2
1 Connection for water supply with filter
2 Coupling element for water connection
3 High pressure connection
4 Appliance switch "0/OFF"/ „I/ON"
5 Detergent Tank
6 Suction hose for detergent
7 Storage for trigger gun
8 Transport handle
9 Storage for accessories
10 Hose drum
11 Mains cable with mains plug
12 Trigger gun
13 Lock trigger gun
14 Key to detach the high-pressure hose
from the trigger gun
15 High pressure hose
16 Spray lance with pressure regulation
(Vario Power)
17 Spray lance with Dirtblaster
Before Startup
Illustrations on Page 2
Illustration

Mount loose parts delivered with appli-
ance prior to start-up.
Illustration

Push the high pressure hose into the trig-
ger gun until it locks audibly.
Note: Make sure the connection nipple is
aligned correctly.

Check the secure connection by pulling
on the high-pressure hose.
- 3
EN
Operation
13