Cleaning And Maintenance; Filter Replacement; Further Maintenance - clage Zip HydroTap G5 BC 20 Gebrauchs- Und Montageanleitung

7. Cleaning and Maintenance

Filter Replacement

If the white LED on the Classic tap or all LEDs at the Arc tap flashing, that indicates that
the internal filter needs to be replaced. The filter replacement interval is calculated
from the values entered in the menu under settings / filter for the maximum filter life
and the maximum filter capacity and the consumption values measured by the unit.
The filter may have to be replaced earlier if an unpleasant odour or taste occurs.
Water may drip out of the filter holder during replacement. Have a bucket and cloths
ready to mop up any water that escapes.
1. Close the angle valve to shut off the water supply.
2. Open the filter door of the undersink unit.
3. Pull out the flushing hose, hold it in a bucket and open the valve to release the
water pressure. Then close the valve.
4. Turn the filter cartridge one quarter turn anticlockwise, as far as it will go.
5. Carefully pull the filter cartridge out of the filter holder from below. Hold the
cartridge level to avoid spilling dirty water.
6. Unpack the new filter cartridge and write today's date in the space provided at
the label. Avoid contact with the O-rings and filter opening, as that could result in
bacterial contamination of the filter.
7. Push a new replacement filter cartridge into the filter holder and turn it clockwise
as far as it will go to lock it in position.
8. To flush through the new filter, enable the 'Flush filter' option in the 'System
Settings' menu on the unit control panel, as described in the 'Menu' section.
9. To reset the filter consumption meter, choose 'Reset filter' under 'System Settings'
on the control panel.
10. Dispose of the used filter correctly.
Note: Replace the filter after a non-use of more than two months, even if the
change interval has not yet been reached!

Further maintenance

Regular servicing is necessary to keep the unit working efficiently at all times. Please
contact customer service for more information.
Sign a maintenance contract with us. Our customer service will contact you in good
time before the next due maintenance to arrange an appointment with you.
We offer a filter service where we can determine your consumption with you and
contact you in good time before reaching the calculated filter capacity.
29
CLAGE
EN