Cleaning And Maintenance - Lionelo Luuk FIX Bedienungsanleitung

car. They make it easier to attach the ISOFIX connectors on the seat
when the connectors in the car are hardly accessible.
•
Press ISOFIX button to pull both locking arms out. Next grab the seat
with two hands, use strength to slip two locking arms in fasteners located
in the car seat until these locking arms engage and you can hear a click.
•
Push the product towards the car seat until it resists.
•
Green indicator must be visible on both sides; then you can be sure
the seat has been properly secured and placed. (fig.3)
If your car is not equipped with ISOFIX system, ignore the step 1.
Step 2:
•
Put your child in the child safety seat.
•
Take the safety belt out, carry the hip belt under the elbow rests and carry
the shoulder belt in accordance with guidelines showed in the figure no. 4.
•
Fasten the belts. (fig. 4)
Step 3:
•
Slip the shoulder belt in the red fastener.
•
Make sure the fastener moves freely on the shoulder and does not
irritate the child's neck. (fig.5)
Information:
1.
Check if the safety belt goes through the shoulder and if is located at
a relevant distance between the neck and shoulder – mark A and B (fig. 5).
2.
Make sure the belt is tight enough, but don't restrict your baby's
movements. The belt must not be twisted (fig. 6)

Cleaning and maintenance:

•
Check the seat for damage and wear periodically.
•
If you find damaged parts, stop using the device.
•
Keep the child safety seat clean to prolong its life.
•
Do not expose the seat to sunlight for a long time.
EN ‑ 8 ‑