Getting Started - Klarstein CRISP-PRO Bedienungsanleitung

EN
24

GETTING STARTED

Before fi rst use
1. Remove all packaging material.
2. Remove any stickers or labels from the appliance .
3. Clean the basket thoroughly and pan with hot water, some washing-up liquid
and a non-abrasive sponge. You can also clean these parts in the dishwasher.
4. Wipe the inside and outside of the appliance with a moist cloth. This is an air
fryer that works on hot air. Do not fi ll the pan with oil or frying fat.
Preparing for use
1. Place the appliance on a stable, horizontal and level surface.
Do not place the appliance on non-heat-resistant surface.
2. Place the basket in the pan properly.
3. Pull the main cord out of the cord storage compartment in the bottom of the
appliance.
Hot-air frying
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pan out of the air fryer.
3. Put the ingredients in the basket (Fig. 3).
Notes
• Never fi ll the basket beyond the MAX indication or exceed the amount
indicated in the table(see section 'Settings' in this chapter),as this could affect
the quality of the end result.
• Use the separator to separate ingredients when you want to prepare different
ingredients at the same time. Place the separator in the basket and fi ll up each
side of the basket with the ingredients.
• Make sure you check the preparation time and the temperature require for
the different ingredients before you start to prepare them simultaneously.
Potato cubes and schnitzel, for example, can be prepared simultaneously
because they require the same settings. Please note that the maximum
amount for each of the ingredients is half the normal amount.
4. Slide the pan back into the air fryer (Fig 2).
Never use the pan without the grill in it.
CAUTION: Danger of burns
Do not touch the pan during and some time after use, as it gets
very hot. Only hold the pan by the handle.