Klarstein CRISP-PRO Bedienungsanleitung Seite 26

EN
26
2
Preset
Temperature
3
time switch
4
"-" and "+"
control
5
Indictor lights
6 Temperature indicator
8 Heating indicator
9 Timer indicator
10 Recipe indicators
• Some ingredients require shaking halfway through the preparation time (see
section "Settings" in this chapter). To shake the ingredients, pull the pan out
of the appliance by the handle and shake it. Then slide the pan back into the
I fryer.
• Caution: Do not press the button of the handle during shaking (Fig. 1).
• To reduce the weight, you can remove the basket from the pan and shake
the basket only. To do so, pull the pan out of the appliance, place it on a heat-
resistant surface and press the button of handle and lift the basket out of the
pan.
• When you hear the buzzer alarm beep~ ~ Di, the set preparation time
has elapsed. Pull the pan out of the appliance and place it on a the trial
framework.
• Check if the ingredients are ready.
• If the ingredients are not ready yet, simply slide the pan back into the
appliance and set the timer to a few extra minutes.
• To remove ingredients (e.g. fries), pull the pan out of the Hot-air fryer and
place it on trial framework, and press the basket release button and lift the
basket out of the pan.
• Do not turn the basket upside down with the pan still attached to it, as any
Selecting the " " Preset Button enables you to
scroll through the 8 popular food choices. Once
selected, the predetermined time and cooking
temperature function begins.
Touch this button, the screen alternately
flashes the temperature and time, and the
corresponding temperature and time indicator
light is lit, and the time and temperature are set
according to the "4" key and "5" key.
When the temperature of the scintillation screen
and corresponding indicator, press "4" and
"5"keys in turn set, temperature control range is
80 to 200 .
When the time of the scintillation screen and
corresponding indicator, press "4" and "5"keys
in turn set, time control range is 0 minutes to 60
minutes.