Getting Started - Klarstein CRISP-PRO Bedienungsanleitung

EN
24

GETTING STARTED

Before first use
1. Remove all packaging materials.
2. Remove any stickers or labels from the appliance .
3. Clean the basket thoroughly and pan with hot water, some washing-up liquid
and a non-abrasive sponge.
4. Wipe inside and outside of the appliance with a moist cloth.
This is an oil-free fryer that works on hot air, Do not fill the pan with oil or frying
fat.
Preparing for use
1. Place the appliance on a stable, horizontal and even surface.Do not place the
appliance on non-heart-resistant surface.
2. Place the grills in the pot.
Do not fill the pan with oil or any other liquid. Do not put anything on top of the
appliance, the airflow will be disrupted and affects the hot air frying result.
Using the appliance
The oil-free can prepare a large range of ingredients. The recipe booklet included
helps you get to know the appliance.
Hot air frying
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pan out of the Hot-air fryer.
3. Put the ingredients in the grill.
4. Slide the pan back into the Hot-air fryer. Carefully align with the guides in the
body of the fryer.
Never use the pan without the grill in it.
Caution: Do not touch the pan during and some time after use, as it gets very hot.
Only hold the pan by the handle.
5. Determine the required preparation time for the ingredient (see section
'Settings' in this chapter).
6. Some ingredients require shaking halfway through the preparation time (see
section "Settings" in this chapter). To shake the ingredients, pull the pan out
of the appliance by the handle and shake it. Then slide the pan back into the
I fryer.