Signs And Symbols - Beurer TL 95 Gebrauchsanweisung

1. SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and on the
type plate for the device:
WARNING
Warning notice indicating a risk of
injury or damage to health
IMPORTANT
Safety note indicating possible damage
to the device/accessory
Product information
Note on important information
Observe the instructions
Read the instructions before starting
work and/or operating devices or
machines
Manufacturer
Protection class II device
The device is double-insulated and is,
therefore, in protection class 2
ON/OFF
Medical device
Item number
Date of manufacture
atmospheric pressure limitation
Disposal in accordance with the Waste
Electrical and Electronic Equipment EC
Directive – WEEE
Batch Code
Separate the product and packaging
elements and dispose of them in accor-
dance with local regulations.
CE labelling
This product satisfies the requirements
of the applicable European and national
directives.
Storage
Permissible storage temperature and humidity
Operating
Permissible operating temperature and
humidity
Protected against solid foreign objects
IP21
12.5 mm in diameter and larger, and
against vertically falling drops of water
Protection against solid objects greater
IP24
than 12,5mm and agains splashes of
water from all directions.
Serial number
Dispose of packaging in an environmen-
tally friendly manner
Marking to identify the packaging material.
A = Material code, B = Material number:
B
1-7 = Plastics, 20-22 = Paper and card-
A
board
For indoor use only
Authorised representative in the Europe-
EC REP
an Community
Importer symbol
Unique Device Identifier (UDI) for unique
UDI
product identification
Direct current
The device is suitable for use with direct
current only
Type
16