Veripart VPMKK50 Gebrauchsanleitung Seite 34

1.2 SAFETY INSTRUCTIONS: INSTALLATION
DANGER!
Risk of fire / flammable materials.
!
CAUTION!
• The appliance is heavy. Take care when handling and wear protective
gloves and closed footwear.
• It is dangerous for persons other than authorised service technicians to
carry out maintenance on electrical components (plug, power cable,
compressor, etc.) or to carry out repairs with the cover plates removed.
To avoid the risk of electric shocks, do not attempt to repair this
appliance yourself.
• If you detect any damage to the appliance or the power cable, do not
connect the appliance but contact the service department (see contact
details on page 38).
• The power cable must be attached behind the appliance and must not be
exposed or loose.
• Make sure that the power cable of the installed appliance is always easily
accessible.
• This appliance requires a standard 220-240V 50Hz socket with 2-pole
earthing. The power cable of this appliance is equipped with a 2-pole
plug suitable for standard wall sockets with earthing to minimise the risk
of electric shocks.
• On first installation (or after turning the door) wait at least four hours
before connecting the appliance to the power. This allows the oil to flow
back into the compressor.
• Ensure that air can circulate around the appliance.
• Pull the plug out of the socket before carrying out any actions on the
appliance (e.g. turning the door).
• Incorrect use of the earthed plug may cause an electric shock.
• This appliance is not intended for use as a built-in refrigerator.
• The correct operation of the appliance can only be guaranteed if the
specified temperature range is respected. If, as a result of another
installation, the correct ventilation requirements are not met, the appliance
34