Troubleshooting; Disposal - Parkside PAFS 550 A1 Originalbetriebsanleitung

Troubleshooting

Fault Possible cause
The inserted noz-
zle is clogged.
The paint
spray gun
The HEA filter
does not
is clogged.
spray.
The paint spray
gun is locked.
The appliance is
not plugged in.
The appliance
has overheated.
The motor
There is no volt-
is not
age on the mains
running.
socket.
The appliance has
been operated
and maintained
according to the
operating instruc-
tions, but still does
not work.

Disposal

Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the user.
Protect the environment and dispose of this
appliance properly.
PAFS 550 A1
Remedy
Clean the nozzle
and use a suita-
ble HEA filter.
Clean or replace
the HEA filter.
Unlock the paint
spray gun.
Insert the mains
Note the labelling on the packaging and separate
plug into an
the packaging material components for disposal if
appropriate
necessary. The packaging material is labelled with
mains socket.
abbreviations (a) and numbers (b) with the
Follow the instruc-
following meanings: 1–7: Plastics, 20–22: Paper
tions in the section
and cardboard, 80–98: Composites.
"Overheating pro-
tection".
Environmental compatibility and material
disposal
Check the mains
■
socket.
■
Contact our
■
Customer
■
Service depart-
ment.
■
■
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The packaging materials have been
selected for their environmental friend-
liness and ease of disposal and are
therefore recyclable. Dispose of pack-
aging materials that are no longer
needed in accordance with applicable
local regulations. Dispose of the pack-
aging in an environmentally friendly
manner.
Paints and lacquers ... are considered
hazardous waste and must be disposed of
accordingly.
Observe the local regulations.
Observe the manufacturer's instructions.
Environmentally harmful chemicals must not be
allowed to get into the ground, groundwater or
any body of water.
Spraying work next to bodies of water or
adjoining surfaces thereof (catchment area) is
therefore not permitted.
When purchasing paints or lacquers ... pay
attention to their environmental compatibility.
GB │ MT │ 75 ■