H-Speed Herakles Mini Bedienungsanleitung Seite 50

SYSTEM SET UP
This screen shows the external and internal tempe-
rature.
The battery is on the cyclic process of charge and
discharge can often become warm after charge or
discharge period. The program can insert a time
delay to occur after each charge and discharge
process to allow the battery adequate time to cool
down before being subjected to the next process.
The value ranges from 1 to 60 minutes.
This program is for NiMH/NiCd battery only. When
the charger detects the delta peak value reaches the
value you set, the charger will say the battery is fully
charged.
The beep sounds at every time pressing the buttons
to confirm your action. The beep or melody sounded
at various times during operation to alert different
mode changes.
These audible sounds can be on or off.
Press the START/ENTER button for 3 more than
seconds to load the factory set.
This screen shows the version.
51 EN