H-Speed Herakles Mini Bedienungsanleitung Seite 33

SPECIAL FEATURES
Data Store/Load
The charger can store up to 10 different charge/discharge profiles for your
convenience. You can keep the data pertaining to program setting of the battery
of continuous charging or discharging. Users can call out these data at any time
without any special program setting.
Terminal Voltage Control (TVC)
The charger allows user to change the end voltage.
Battery Meter
The user can check battery's total voltage, the highest voltage, the lowest voltage
and each cell's voltage.
Maximum Safety
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination
program based on the principle of the Delta-peak voltage detection. When the bat-
tery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH
or NiCd battery, it is useful for the NiMH battery of low impedance and capacity in
the „AUTO" charging mode.
Capacity Limit
The charging capacity is always calculated as the charging current multiplied by
time. If the charging capacity exceeds the limit, the process will be terminated
automatically when you set the maximum value.
Temperature Threshold*
The battery's internal chemical reaction will cause the temperature of the battery to
rise. If the temperature limit is reached, the process will be terminated.
*This function is available by connecting optional temperature probe, which is not
included in the package.
Processing Time Limit
You can also limit the maximum process time to avoid any possible defect.
EN 34