Charging Of Lithium Battery - H-Speed Herakles Mini Bedienungsanleitung

LITHIUM BATTERY (LiPo/LiFe/LiIon/LiHV) PROGRAM
Number Elapsed
of cells time
Charging
current

CHARGING OF LITHIUM BATTERY

This charging mode is for charging LiPo/LiFe/LiIon/LiHV battery in normal mode.
Note: We recommend charging lithium batteries with a balance lead in the balance
mode only.
Batt type
Stop
EN
Battery
Charged
voltage
capacity
> 3 seconds
This screen displays the number of cells you set
up and the processor detects.
R=Number of cells detected by charger.
S=Number of cells set by you at the previous
screen.
If both numbers are identical you can start char-
ging process. If not, press BATT TYPE/STOP
button to go back to previous screen to recheck
the number of cells of the battery pack before
going ahead.
This screen shows the real-time status during
charge process. Press BATT TYPE/STOP button
once to stop the charge process.
The left side of the first line shows the type of
battery you choose. The value on the left of the
second line of the charger is current the user
sets. After setting the current and voltage,
press the START/ENTER button for more than
3 seconds to start the process.
This displays the number of cells you set up and
the processor detects.
R=Number of cells detected by charger.
S=Number of cells set by you at the previous
screen.
38