PB BATTERY PROGRAM
Discharged
Elapsed
time
Battery
Discharge
type
current
NIMH/NICD BATTERY PROGRAM
CHARGING OF NIMH/NICD BATTERY
Battery type
Elapsed
Battery
time
type
Discharge
current
CHARGING NIMH/NICD BATTERY IN THE AUTO CHARGE MODE
In this program the charger detects the condition of the battery which is connected
to the output and automatically charges the battery. In this mode, you should set
up the upper limit of the charge current to avoid damage by excessive feeding
current. Some batteries of low resistance and capacity can lead to higher current
in the auto charging mode.
Battery type
capacity
Battery
voltage
Battery
voltage Discharged
capacity
The screen display the real-time discharging
status. Press START/ENTER button to change
the discharging value. Press START/ENTER
button again to store the parameter value you
set. Press BATT TYPE/STOP button to end the
program.
This program is for charging and discharging
of NiMH/NiCd batteries associated with R/C
models applications. You can press Inc. or Dec.
button to change the parameter value, press
START/ENTER button to store the value.
The screen displays the real-time charging
status. Press BATT TYPE/STOP button to stop
the process. The audible sound indicates the
end of process.
The program is for charging of NiMH/NiCd
batteries in auto mode.
You can make it blink in the current field and
press INC. or DEC. to switch mode.
43
EN