LITHIUM BATTERY (LiPo/LiFe/LiIon/LiHV) PROGRAM
Elapsed
Number
time
of cells
Charge or
discharge
current
DISCHARGING LITHIUM BATTERY
Batt type
Stop
Elapsed
Number
Battery
time
of cells
voltage
Discharge
current
Current
Supplied
voltage
capacity
battery
> 3 seconds
Discharged
capacity
This screen shows the real-time status char-
ging. Press BATT TYPE/STOP button once to
stop the charge process.
The value of discharge current on the left can
not exceed 1C, and the value on the right can
not be under the voltage recommended by the
manufacturer to avoid over discharging.
press the START/ENTER button for more than
3 seconds to start discharging.
This screen displays the number of cells you set
up and the processor detects.
R=Number of cells detected by charger.
S=Number of cells set by you at the previous
screen.
If both numbers are identical you can start char-
ging process. If not, press BATT TYPE/STOP
button to go back to previous screen to recheck
the number of cells of the battery pack before
going ahead.
This screen shows the real-time status of
discharging, you can press BATT TYPE/STOP
button to stop discharging.
41
EN